toshiba ct 8562 manual

The Toshiba CT-8562 is a versatile audio system with AM/FM radio, cassette player, CD player, and auxiliary input capabilities. Featuring dual cassette decks for recording and playback, 5-band equalizer, digital tuning, auto-reverse function, remote control, and 30W RMS output power. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Recording Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with dual cassette decks, CD player, AM/FM tuner, Remote Control, Auxiliary input, Headphone jack, Speaker terminals.

Feature	Description
Dual cassette decks	Deck A for playback, Deck B for recording and playback
CD player	Supports CD-DA, CD-R, CD-RW formats
AM/FM tuner	30 station presets (20 FM, 10 AM)
5-band equalizer	Adjustable sound profiles (ROCK, POP, CLASSIC, JAZZ, FLAT)
Auto-reverse	Automatic side change for continuous playback
Remote control	Full function infrared remote
Auxiliary input	For connecting external audio sources
Headphone jack	For private listening
Speaker terminals	For connecting external speakers
Power switch	Turns system on/off

Installation

Unpack and inspect contents. Place on stable, level surface.

Connect speakers: Attach speaker wires to terminals observing correct polarity.
Connect antenna: Attach FM wire antenna and AM loop antenna.
Connect power: Plug AC power cord into wall outlet.
Connect auxiliary devices: Use AUX input for external audio sources.

WARNING! Ensure proper ventilation; do not block ventilation openings. Keep away from heat sources.

First-Time Setup

Power on system; follow initial setup procedure.

Set clock: Press CLOCK button and set current time.
Program radio stations: Use AUTO SCAN or manual tuning to store favorite stations.
Adjust equalizer: Select preferred sound profile or customize manually.
Test functions: Verify cassette playback, CD operation, and recording capability.

CAUTION! Handle cassettes and CDs carefully to avoid damage to media and mechanism.

Specifications

Power Output: 30W RMS per channel (at 8 ohms)
Frequency Response: 20Hz - 20kHz (±3dB)
Signal-to-Noise Ratio: >75dB (CD), >58dB (cassette)
Tuner Section: AM 530-1710kHz, FM 87.5-108MHz
CD Compatibility: CD-DA, CD-R, CD-RW
Cassette Mechanism: Auto-reverse, Dolby B noise reduction
Power Requirements: 120V AC, 60Hz, 45W
Dimensions: 430mm (W) x 135mm (H) x 320mm (D)
Weight: 6.8 kg

Controls and Settings

Front Panel: POWER, VOLUME, BASS, TREBLE, SOURCE SELECT, TUNING, PRESET, TAPE A/B controls.

Remote: POWER, Numeric buttons, PLAY, STOP, PAUSE, REC, FF, REW, TUNING, PRESET, EQ, SLEEP.

Audio Controls: VOLUME, BASS, TREBLE, BALANCE, 5-band equalizer. Tuner: AUTO SCAN, manual tuning, preset memory. Tape: PLAY, REC, FF, REW, PAUSE, AUTO REVERSE. CD: PLAY, PAUSE, STOP, SKIP, REPEAT, RANDOM. System: CLOCK, SLEEP timer, DIM display.

Connecting Devices

Speakers: Use speaker terminals. Auxiliary: AUX input for external audio. Headphones: 3.5mm jack.

Turn off system before making connections.
Match impedance: Use 6-8 ohm speakers.
Select source: Use SOURCE button (TUNER, TAPE, CD, AUX).
Test connections: Verify audio output from all sources.

Tip: Use high-quality cables for best audio performance. Keep cables away from power cords.

Playing Media

Supports cassettes, CDs, radio, and auxiliary input.

Cassette playback: Insert tape, press PLAY; auto-reverse engages automatically.
CD playback: Load CD, press PLAY; use SKIP for track selection.
Radio: Select TUNER source, tune to station, store as preset if desired.
Auxiliary: Connect external device, select AUX source.
Repeat functions: Press REPEAT for continuous play (CD/track).
Random play: Press RANDOM for shuffled track order (CD).
Sleep timer: Set SLEEP for automatic power-off.

WARNING! Do not touch laser lens in CD mechanism. Keep magnets away from cassettes.

Recording Features

Dubbing between cassettes and recording from other sources.

Cassette-to-cassette: Insert source tape in Deck A, blank tape in Deck B, press DUB.
CD-to-tape: Play CD, insert blank tape, press REC + PLAY.
Radio-to-tape: Tune to desired station, insert blank tape, press REC + PLAY.
Timer recording: Set clock and timer for automatic recording.

Note: Use Dolby B for noise reduction during recording. Ensure recording tabs intact on cassettes.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. Cassette heads: Use cleaning cassette monthly. CD lens: Use CD lens cleaner if skipping occurs.

CAUTION! Do not use solvents or abrasives. Avoid liquid cleaners near controls and openings.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Toshiba Corporation. For support, visit www.toshiba.com or contact authorized service centers. Manufactured under license from Dolby Laboratories.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; verify outlet function; check fuse.
No sound	Volume/source selection	Adjust volume; verify source selection; check speaker connections.
CD skipping	Dirty lens/damaged disc	Clean CD lens; check disc for scratches; use cleaner disc.
Poor tape playback	Dirty heads	Use head cleaning cassette; demagnetize if necessary.
Weak radio reception	Antenna placement	Reposition antennas; extend FM wire fully; rotate AM loop.
Remote not working	Batteries/obstruction	Replace batteries; point directly at sensor; remove obstacles.

Reset: Unplug for 30 seconds then reconnect if system locks up.

Service: Contact authorized Toshiba service center; www.toshiba.com/support